VertexRSI Brand Delivers a
Cost-Effective, High Data Rate Solution for a Wide Variety of
Applications
 TriPoint
Global Communications’ VertexRSI business is introducing a line of
Pre-Engineered SATCOM Terminals to address many of today’s digital
satellite communication earth station and network requirements.
Brad Majeres, Vice President and
General Manager, VertexRSI Programs Division Duluth Facility, said,
“The new Pre-Engineered SATCOM Terminals provide a cost-effective
and simple-to-implement communications solution for a variety of
SATCOM applications including voice, data or video supported by
Gateway Earth Stations, GSM Network Backbone Stations, Digital
Television Uplink Stations, VSAT Hubs, Semi-Permanent Fixed Earth
Stations and Disaster Recovery Quick Deploy Stations.
“The units feature VertexRSI
standard RF products and commercially available off-the-shelf
satellite modems,” Majeres said. “An L-Band IF architecture is used
to minimize the overall earth station cost, while at the same time
maximize the station’s operational capacity and flexibility. The
L-Band interface allows the earth station operator to gradually grow
his services by incorporating other L-Band satellite modems, IRDs,
or even 70 MHz services through the use of a
separate 70 to L-Band
converter.”
VertexRSI uses its type approved
3.8m and 4.8m C-Band and Ku-Band antennas, along with its
Solid-State Power Amplifiers (SSPAs) ranging from 25 Watts to 100
Watts in C-Band and 20 Watts to 70 Watts in Ku-Band, each with an
integral, internally referenced block up converter as the L-Band to
RF uplink for the terminals. VertexRSI's C-Band or Ku-Band Low Noise
Block Downconverter (LNB) completes the L-Band receive interface.
Users can interface to the
pre-engineered terminal through one of the many synchronous T1/E1,
or high speed interfaces on the satellite modem.
“The terminals support a high data
rate of up to 10 megabits per second,” Majeres said.
“VertexRSI’s Pre-Engineered SATCOM
Terminals are compact, and simple to install,” Majeres said.
“Availability is approximately four to five weeks for a complete
terminal and application and network engineering support is also
available if required,” he added.
Click here to access complete
details on the
VertexRSI Pre-Engineered Terminals.
|
